Electrically Actuated Brass Ball Valves

Failsafe Electrically Actuated 3 Way Brass Ball Valve with all EU content

E1304 Failsafe Electric 3 Way Ball Valve Brass Full Bore and J3C-S Smart Actuator with BSR pre-installed

Overview: All EU content actuated ball valve package. The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Ball valve with BSP female treaded end connnections as 3 way L port for diverting duties or 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 10 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Available L port or T port
Can be configured fail open, or fail closed.
Max +100C service using a mounting kit.

Part NumberE1304S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Brass 3 Way Ball Valve Overview
Bore SizeFull bore.
End ConnectionsBSPP Female
Body MaterialNickel plated brass
Ball MaterialHard chromed brass
Seat MaterialPTFE
Seal MaterialNBR
Pressure Rating40 Bar
Temperature Rating-20C to +95C
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".