Modulating Electrically Actuated 3 Way Brass Ball Valve
E1305 Modulating Electric 3 Way Ball Valve Full Bore Brass and J3C-S Smart Actuator with DPS pre-installed
Overview: All EU content actuated ball valve package. The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Ball valve with BSP female treaded end connnections as 3 way L port for diverting duties or 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
Select Actuator Function:
Options: Available L port or T port
Can be configured to stay put, fail open, or fail closed on loss of control signal.
Stays put on loss of external power.
Max +100C service using a mounting kit.
|JJ Electric Actuator Type J3CS Overview|
|Supply Voltage Range||24-240V AC or DC|
|Actuator Status Light||Yes, multi-colour LED|
|Fault Status Light||Yes, Flashing multi-colour LED|
|Electrical Connection||External Din plugs (Supplied)|
|Ingress Protection||IP67 Fully weatherproof|
|Anti-condensation Protection||Thermostatic heater supplied|
|Ambient Temperature range||-20C to +70C|
|Over Torque Protection||Electronic torque limiter|
|Emergency Hand Operation||Yes, selectable manual overrride|
|Visual Position Indicator||Yes, dome style, mechanically driven|
|End of Travel Confirmation||Yes, 2 volt free SPDT micro-switches|
|Brass 3 Way Ball Valve Overview|
|Bore Size||Full bore.|
|End Connections||BSPP Female|
|Body Material||Nickel plated brass|
|Ball Material||Hard chromed brass|
|Pressure Rating||40 Bar|
|Temperature Rating||-20C to +95C|