Electric Brass Ball Valve

On Off Electrically Actuated 3 Way Brass Ball Valve

E1303 On Off Electric 3 Way Ball Valve Full Bore Brass with 24V to 240V J3C-S Smart Electrical Actuator

Overview: All EU content actuated ball valve package. The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Ball valve with BSP female treaded end connnections as 3 way L port for diverting duties or 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to and must have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
Available L port or T port.
Max +100C service using a mounting kit.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE1303S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Brass 3 Way Ball Valve Overview
Bore SizeFull bore
End ConnectionsBSPP Female
Body MaterialNickel plated brass
Ball MaterialHard chromed brass
Seat MaterialPTFE
Seal MaterialNBR
Pressure Rating40 Bar
Temperature Rating-20C to +95C
J3CS On-Off Operation Functional demostration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.