Electric Brass Ball Valve

Failsafe Modulating Electrically Actuated Economy Brass Ball Valve

E1106E Failsafe Modulating Electric Brass Ball Valve and J3C-S Smart Actuator with BSR and DPS pre-installed

Overview: The brass ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way full bore brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
Can be configured to stay put, fail open, or fail closed on loss of control signal.
Can be configured to fail open, or fail closed on loss of external power.
Max +100C service using a mounting kit.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE1106ES
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Brass Ball Valve Overview
Bore SizeFull bore giving unrestricted flow
End ConnectionsBSPP Female
Body MaterialNickel plated brass
Ball MaterialHard chromed brass
Seat MaterialPTFE
Seal MaterialNBR
Pressure Rating40 Bar
Temperature Rating-20C to +95C
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.