Failsafe Electrically Actuated Brass Ball Valve WRAS Approved
E1104 Failsafe Electric Brass Ball Valve Full Bore WRAS Approved with J3C-S Smart Actuator
Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to, and must have power applied continuously.
Select Actuator Function:
Sizing Criteria: J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
Options: Can be configured fail open, or fail closed.
Max +95C service using a mounting kit.
|JJ Electric Actuator Type J3CS Overview|
|Supply Voltage Range||24-240V AC or DC|
|Actuator Status Light||Yes, multi-colour LED|
|Fault Status Light||Yes, Flashing multi-colour LED|
|Electrical Connection||External Din plugs (Supplied)|
|Ingress Protection||IP67 Fully weatherproof|
|Anti-condensation Protection||Thermostatic heater supplied|
|Ambient Temperature range||-20C to +70C|
|Over Torque Protection||Electronic torque limiter|
|Emergency Hand Operation||Yes, selectable manual overrride|
|Visual Position Indicator||Yes, dome style, mechanically driven|
|End of Travel Confirmation||Yes, 2 volt free SPDT micro-switches|
|Brass Ball Valve Overview|
|Bore Size||Full bore giving unrestricted flow|
|End Connections||BSPP Female|
|Body Material||Nickel plated brass|
|Ball Material||Hard chromed brass|
|Pressure Rating||40 Bar|
|Temperature Rating||-20C to +95C|