Electrically Actuated Plastic Ball Valves

Modulating Electrically Actuated PP 3 Way Ball Valve TKD from FIP

E3516F Failsafe Modulating Electric 3 Way Ball Valve FIP TKD in PP with J3C-S Smart Electric Actuator

Overview: Electrically actuated modulating triple union FIP TKD full bore polyproplene PP ball valve, 3 way, ends fusion sockets,

Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical modulating actuators have been sized on a maximum pressure wet service

Available L port or T port.
Flanged PN16 option.
Seals can be FPM (Viton).

No Datasheets.
Part NumberE3515FS
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
PP Ball Valve Overview
Bore SizeFull bore
End ConnectionsFusion sockets
Body MaterialPolypropylene
Ball MaterialPolypropylene
Seat MaterialPTFE
Seal MaterialEPDM
Pressure Rating10 Bar at +20C max
Temperature Rating0C to +100C
J3CS DPS Modulating System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".