Electric Plastic Ball Valve

Actuated Failsafe Modulating GF546 2 Way PVC Ball Valve Type E3106G assembled and tested at our Matlock UK works.

E3016G JJ Electric GF546 PVC Ball Valve with failsafe modulating J3C-S Smart Actuator

Overview: Electrically actuated failsafe modulating double union GF546 full bore uPVC ball valve, 2 way, ends solvent cement sockets,

Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical on-off actuators have been sized on a maximum pressure wet service

Options:
Solvent sockets can be imperial or metric sizes, or BSP.
Flanged PN16 option.
Seals can be FPM (Viton).

ENQUIRE ABOUT THIS PRODUCT
Part NumberE3016GS
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
PVC Ball Valve Overview
Bore SizeFull bore
End ConnectionsSolvent sockets
Body MaterialuPVC
Ball MaterialuPVC
Seat MaterialPTFE
Seal MaterialEPDM
Pressure Rating16 Bar at +20C max
Temperature Rating0C to +60C
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.