Electric Plastic Ball Valve

On Off Electrically Actuated PVC 3 Way Ball Valve from Hidroten

E3313H On Off Electric 3 Way Ball Valve in PVC with J3C-S Smart Electric Actuator

Overview: EU manufactured Hidroten 3 way triple union full bore PVC ball valve, 3 way L port or T port, blow-out proof ball and stem, EPDM seals with FKM (Viton) option, ends imperial or metric solvent sockets, or BSP, fitted with direct mounted J3CS electric actuator, assembled and tested at J+J's ISO:9001-2015 approved works in Matlock, Derbyshire.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +20C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
Available L port or T port.
Solvent sockets can be imperial or metric sizes, or BSP.
Flanged PN16 option.
Seals can be FPM (Viton).

ENQUIRE ABOUT THIS PRODUCT
Part NumberE3313HS
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
PVC 3 Way Ball Valve Overview
Bore SizeFull bore
End ConnectionsSolvent sockets
Body MaterialuPVC
Ball MaterialuPVC
Seat MaterialPTFE
Seal MaterialEPDM
Pressure Rating16 Bar at +20C max
Temperature Rating0C to +60C
J3CS On-Off Operation Functional demostration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.