Electric Stainless Steel Ball Valve

Failsafe Electrically Actuated Stainless Steel Ball Valve 6000psi 2 Way

E2814 Failsafe Electric Ball Valve 6000psi in Stainless Steel with J3C-S Smart Electric Actuator

Overview: The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
BSPT, NPT or compression ends.
Can be configured fail open, or fail closed.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE2814S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless Ball Valve Overview
Bore SizeReduced bore with full bore option
End ConnectionsBSPP Female
Body MaterialForged 316SS S11 to NACE
Ball MaterialForged 316SS S11 to NACE
Seat MaterialPVDF
Seal MaterialPTFE and VITON
Pressure Rating414 Bar at max +150C
Temperature Rating-20C to +150C
J3CS BSR Failsafe System Demonstration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.