Electric Stainless Steel Ball Valve

Failsafe Modulating Electrically Actuated Stainless Stee Ball Valve 6000psi 2 Way

E2816 Failsafe Modulating Ball Valve 6000psi in Stainless Steel with J3C-S Smart Electric Actuator

Overview: The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
BSPT, NPT or compression ends.
Can be configured to stay put, fail open, or fail closed on loss of control signal.
Can be configured to fail open, or fail closed on loss of external power.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE2816S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless Ball Valve Overview
Bore SizeReduced bore with full bore option
End ConnectionsBSPP Female
Body MaterialForged 316SS S11 to NACE
Ball MaterialForged 316SS S11 to NACE
Seat MaterialPVDF
Seal MaterialPTFE and VITON
Pressure Rating414 Bar at max +150C
Temperature Rating-20C to +150C
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.