Electric Stainless Steel Ball Valve Actuators

On Off Electrically Actuated Stainless Steel Ball Valve PN16 Firesafe

E4203 On Off Electric Ball Valve PN16 Firesafe in Stainless Steel with J3C-S Smart Electric Actuator

Overview: The 2 piece bolted contruction anti-static stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe tested and approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Max +130C service using a mounting kit.

Part NumberE4203S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless Ball Valve Overview
Bore SizeFull bore with unrestricted flow
End ConnectionsFlanged PN16
Body MaterialCF8M Cast 316SS
Ball MaterialCF8M Cast 316SS
Seat MaterialRPTFE
Seal MaterialPTFE
Pressure Rating16 Bar
Temperature Rating-20C to +200C
Firesafe StandardAPI607 Latest Edition
Test CertificatesEN ISO1024 3.1b
J3CS On-Off Operation Functional demostration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".