Electric Stainless Steel Ball Valve

Actuated Failsafe High Pressure 3 Way Stainless Steel Ball Valve

E2914 JJ Electric Stainless Steel 6000psi 3 Way Ball Valve with Failsafe J3C-S Smart Actuator

Overview: The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
Available L port or T port.
Available as bottom entry valve.
Can be configured fail open, or fail closed.
BSPT, NPT or compression ends.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE2914S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless 3 Way Ball Valve Overview
Bore SizeReduced bore with full bore option
End ConnectionsBSPP Female
Body MaterialForged 316SS S11 to NACE
Ball MaterialForged 316SS S11 to NACE
Seat MaterialPVDF
Seal MaterialPTFE and VITON
Pressure Rating414 Bar at max +150C
Temperature Rating-20C to +150C
J3CS BSR Failsafe System Demonstration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.