Electric Stainless Steel Ball Valve

Modulating Electrically Actuated Stainless Steel Ball Valve ASA150 Flanged

E4705 Modulating Electric Ball Valve ASA150 Non-Firesafe in Stainless with J3C-S Smart Electric Actuator

Overview: This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Options:
Available L port or T port.
Can be configured to stay put, fail open, or fail closed on loss of control signal.
Stays put on loss of external power.
Max +130C service using a mounting kit.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE4705S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless 3 Way Ball Valve Overview
Bore SizeFull bore
End ConnectionsASA150
Body MaterialCF8M Cast 316SS
Ball MaterialCF8M Cast 316SS
Seat MaterialRPTFE
Seal MaterialPTFE
Pressure RatingANSI Class 150
Temperature Rating-20C to +200C
J3CS DPS Modulating System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.