Electric Iron Butterfly Valves

Actuated On Off Failsafe Wafer Pattern Cast Iron Butterfly Valves Type E6104 assembled and tested at our Matlock UK works.

E6104 Electric Cast Iron Wafer Butterfly Valve with failsafe J3C-S Smart Actuator

Overview: Electrically actuated failsafe wafer Pattern cast iron butterfly valve, stainless steel disc, EPDM liner,

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical failsafe actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service

Options:
Alternative liners to suit different media.
Typically NBR, Viton, Silicon.
PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.

ENQUIRE ABOUT THIS PRODUCT
Part NumberE6104S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Butterfly Valve Overview
End ConnectionsWafer Pattern suits PN16 & ASA150
Body MaterialCast Iron
Disc MaterialStainless steel
Seat MaterialEPDM
Pressure Rating10-16 Bar at +70C max
Temperature Rating0C to +100C

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.