Modulating Electrically Actuated Butterfly Valve WRAS Approved Ductile Ductile Iron Body Lugged PN16
E6205W Modulating Electric Butterfly Valve WRAS Ductile Iron Lugged Body with J3C-S Smart Electric Actuator
Overview: Electrically actuated modulating lugged and tapped pattern ductile iron butterfly valve, stainless steel disc, EPDM liner, UK WRAS approved for use with drinking water.
Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
Select Actuator Function:
J3CS Electrical modulating actuators have been sized on drinking water at a maximum pressure of 10 bar. If your application differs please contact us to confirm sizing.
Any change to disc or liner material negates WRAS apprioval
Alternative liners to suit different media typically;
NBR, Viton, Silicon, and PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.
|JJ Electric Actuator Type J3CS Overview|
|Supply Voltage Range||24-240V AC or DC|
|Actuator Status Light||Yes, multi-colour LED|
|Fault Status Light||Yes, Flashing multi-colour LED|
|Electrical Connection||External Din plugs (Supplied)|
|Ingress Protection||IP67 Fully weatherproof|
|Anti-condensation Protection||Thermostatic heater supplied|
|Ambient Temperature range||-20C to +70C|
|Over Torque Protection||Electronic torque limiter|
|Emergency Hand Operation||Yes, selectable manual overrride|
|Visual Position Indicator||Yes, dome style, mechanically driven|
|End of Travel Confirmation||Yes, 2 volt free SPDT micro-switches|
|Butterfly Valve Overview|
|End Connections||Fully lugged and tapped for PN16|
|Disc Material||Stainless steel|
|Seat Material||WRAS Approved EPDM|
|Pressure Rating||10-16 Bar at +70C max|
|Temperature Rating||0C to +100C|