Electric Iron Butterfly Valves

Actuated On Off Lugged PN16 Ductile Iron WRAS Butterfly Valves Assembled and Tested at our Matlock UK works.

E6203W Electric Ductile Iron Lugged PN16 WRAS Butterfly Valve with on off J3C-S Smart Actuator

Overview: Electrically actuated on-off lugged and tapped pattern ductile iron butterfly valve, stainless steel disc, EPDM liner, UK WRAS approved for use with drinking water.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on-off actuators have been sized on drinking water at a maximum pressure of 10 bar. If your application differs please contact us to confirm sizing.

Options:

Any change to disc or liner material negates the WRAS approval.
Alternative liners to suit different media typically;
NBR, Viton, Silicon, and PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.

ENQUIRE ABOUT THIS PRODUCT
Part Number E6203WS
JJ Electric Actuator Type J3CS Overview  
Supply Voltage Range 24-240V AC or DC
Power Light Yes
Actuator Status Light Yes, multi-colour LED
Fault Status Light Yes, Flashing multi-colour LED
Electrical Connection External Din plugs (Supplied)
Ingress Protection IP67 Fully weatherproof
Anti-condensation Protection Thermostatic heater supplied
Ambient Temperature range -20C to +70C
Over Torque Protection Electronic torque limiter
Emergency Hand Operation Yes, selectable manual overrride
Visual Position Indicator Yes, dome style, mechanically driven
End of Travel Confirmation Yes, 2 volt free SPDT micro-switches
Butterfly Valve Overview  
End Connections Fully lugged and tapped for PN16
Body Material DuctileIron
Disc Material Stainless steel
Seat Material WRAS Approved EPDM
Pressure Rating 10-16 Bar at +70C max
Temperature Rating 0C to +100C

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.