Electric Iron Butterfly Valves

Failsafe Electrically Actuated Butterfly Valve Ductile Iron Body Lugged PN16

E6204 Failsafe Electric Butterfly Valve Ductile Iron Lugged Body with J3C-S Smart Electric Actuator

Overview: Failsafe electrically actuated butterfly valve with ductile iron body , lugged and tapped PN16, stainless steel disc, EPDM liner, with a J3C-S type electric actuator, supplied assembled and tested

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position (either closed, or open) on external power failure using an internal battery. Designed to have power applied continuously to trickle charge the battery to maintain it at full capacity.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical failsafe actuators have been sized on media compatible with EPDM at a maximum pressure wet service

Alternative liners to suit different media.
Typically NBR, Viton, Silicon.
PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.

Part NumberE6204S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Butterfly Valve Overview
End ConnectionsFully lugged and tapped for PN16
Body MaterialDuctileIron
Disc MaterialStainless steel
Seat MaterialEPDM
Pressure Rating10-16 Bar at +70C max
Temperature Rating0C to +100C

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.