JJautomation

Overview: Electrically actuated failsafe modulating wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
Select Actuator Function:
Sizing Criteria: J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
Options: Viton liner.
ENQUIRE ABOUT THIS PRODUCTPart Number | E6716S |
JJ Electric Actuator Type J3CS Overview | |
Supply Voltage Range | 24-240V AC or DC |
Power Light | Yes |
Actuator Status Light | Yes, multi-colour LED |
Fault Status Light | Yes, Flashing multi-colour LED |
Electrical Connection | External Din plugs (Supplied) |
Ingress Protection | IP67 Fully weatherproof |
Anti-condensation Protection | Thermostatic heater supplied |
Ambient Temperature range | -20C to +70C |
Over Torque Protection | Electronic torque limiter |
Emergency Hand Operation | Yes, selectable manual overrride |
Visual Position Indicator | Yes, dome style, mechanically driven |
End of Travel Confirmation | Yes, 2 volt free SPDT micro-switches |
Butterfly Valve Overview | |
End Connections | Wafer Pattern to suit PN16 |
Body Material | uPVC |
Disc Material | uPVC |
Seat Material | EPDM |
Pressure Rating | 10 Bar at +20C max |
Temperature Rating | 0C to +60C |