Modulating Electrically Actuated Butterfly Valve Stainless Steel Body Lugged PN16
E6605 Modulating Electric Butterfly Valve Stainless Steel Lugged Body with J3C-S Smart Electric Actuator
Overview: Electrically actuated modulating lugged and tapped Pattern stainless steel butterfly valve, stainless steel disc, EPDM liner,
Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
Select Actuator Function:
Sizing Criteria: J3CS Electrical modulating actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
Options: Alternative liners to suit different media.
Typically NBR, Viton, Silicon.
PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.
|JJ Electric Actuator Type J3CS Overview|
|Supply Voltage Range||24-240V AC or DC|
|Actuator Status Light||Yes, multi-colour LED|
|Fault Status Light||Yes, Flashing multi-colour LED|
|Electrical Connection||External Din plugs (Supplied)|
|Ingress Protection||IP67 Fully weatherproof|
|Anti-condensation Protection||Thermostatic heater supplied|
|Ambient Temperature range||-20C to +70C|
|Over Torque Protection||Electronic torque limiter|
|Emergency Hand Operation||Yes, selectable manual overrride|
|Visual Position Indicator||Yes, dome style, mechanically driven|
|End of Travel Confirmation||Yes, 2 volt free SPDT micro-switches|
|Butterfly Valve Overview|
|End Connections||Fully lugged and tapped to suit PN16|
|Body Material||Stainless Steel|
|Disc Material||Stainless steel|
|Pressure Rating||10-16 Bar at +70C max|
|Temperature Rating||0C to +100C|