Electric Stainless Steel Butterfly Valves

Failsafe Modulating Electrically Actuated Butterfly Valve Stainless Steel Body Wafer Pattern

E6506 Failsafe Modulating Electric Butterfly Valve Stainless Steel Wafer Body with J3C-S Electric Actuator

Overview: Electrically actuated failsafe modulating wafer Pattern stainless steel butterfly valve, stainless steel disc, EPDM liner,

Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical failsafe modulating actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service

Options:
Alternative liners to suit different media.
Typically NBR, Viton, Silicon.
PTFE liner versions available.
Higher temperatures possible using a mounting kit but are liner and application dependant.

ENQUIRE ABOUT THIS PRODUCT
No Datasheets.
Part NumberE6506S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Butterfly Valve Overview
End ConnectionsWafer Pattern to suit PN16/ ASA150
Body MaterialStainless Steel
Disc MaterialStainless steel
Seat MaterialEPDM
Pressure Rating10-16 Bar at +70C max
Temperature Rating0C to +100C

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.