J3C-L 24V Smart Electric Valve Actuator

Type J3C Model L300 Electric 24V Actuator Power Open Power Close

J3C-L300 On Off Electric Actuator Maximum 350Nm for 24V

Overview: Maximum 350Nm 12-24V Multi-voltage reversible IP67 failsafe modulating quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F10 & F07 x 22mm female star mounting.

Function: Continuous external power, movement controlled by DPS (Digital Positioning System) input control signal, typically 4-20mA or 0-10V. Configurable to open, close, or freeze on loss of control signal. Pre-set to fail open, or close on loss of external power failure. Output signal provided. Supplied with BSR & DPS systems pre-installed and function tested.

Select Actuator Function:

Sizing Criteria:

Max break torque 350Nm.
Max run and reseat torque 300Nm.
Max ambient temp range -20 to +70C.

Options:

Failsafe using internal battery (BSR) kit.
Modulating using potentiometer positioner (DPS) kit.
Failsafe modulating using BSR & DPS kits.
F12 x 27mm female star mounting.

ENQUIRE ABOUT THIS PRODUCT
JJ Electric Actuator Type J3C-L300 Overview  
Model J3CL300 On Off
Function On Off
On loss of power Stays put
Max Break and Run Torque Nm 350 - 300
Supply Voltage Range 12-24V AC or DC
Working time 58s
Power Light Yes
Actuator Status Light Yes, Red LED
Fault Status Light Yes, Flashing Red LED
Electrical Connection External Din plugs (Supplied)
Valve mounting ISO5211 F07 and F10
Drive Output 22mm female star
Ingress Protection IP67 Fully weatherproof
Anti-condensation Protection Thermostatic heater supplied
Ambient Temperature range -20C to +70C
Over Torque Protection Electronic torque limiter
Emergency Hand Operation Yes, selectable manual override
Visual Position Indicator Yes, dome style, mechanically driven
End of Travel Confirmation Yes, 2 volt free SPDT micro-switches
Warranty 10,000 cycles or 1 year from date of purchase
Weight 5.2kg
No connections.
J3C Model 140 & 300 On-Off Demonstration
J+J Factory automated actuator testing procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.