J3C-L 24V Smart Electric Valve Actuator

Type J3C Model L85 Electric 24V Actuator with Positioner Installed

J3C-L85-DPS Modulating Electric Actuator Maximum 90Nm for 24V

Overview: Maximum 90Nm 12-24V Multi-voltage reversible IP67 modulating quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F07, F05 x 17mm female star mounting.

Function: Continuous external power, movement controlled by DPS (Digital Positioning System) input control signal, typically 4-20mA or 0-10V. Configurable to open, close, or freeze on loss of control signal. Pre-set to fail open, or close on loss of external power failure. Output signal provided. Supplied with DPS system pre-installed and function tested.

Select Actuator Function:

Sizing Criteria:

Max break torque 90Nm.
Max run and reseat torque 85Nm.
Max ambient temp range -20 to +70C.

Options:

BSR Failsafe function conversion kit to create failsafe modulating function.

ENQUIRE ABOUT THIS PRODUCT
JJ Modulating Electric Actuator Type J3C-L85 Overview  
Model J3CL85-DPS Modulating
Function Proportional control
On loss of power Fails to pre-set position (closed or open) or freezes
Function conversion kit DPS pre-installed and tested by J+J
Kit type Digital positioner with magnetic position sensing
Max Break and Run Torque Nm 90 - 85
Supply Voltage Range 12-24V AC or DC
Working time 30s
Power Light Yes
Actuator Status Light Yes, red LED
Fault Status Light Yes, Flashing red LED
Electrical Connection External Din plugs (Supplied)
Valve mounting ISO5211 F05and F07
Drive Output 17mm female star
Ingress Protection IP67 Fully weatherproof
Anti-condensation Protection Thermostatic heater supplied
Ambient Temperature range -20C to +70C
Over Torque Protection Electronic torque limiter
Emergency Hand Operation Yes, selectable manual override
Visual Position Indicator Yes, dome style, mechanically driven
End of Travel Confirmation Yes, 2 volt free SPDT micro-switches
Warranty 10,000 cycles or 1 year from date of purchase
Weight 3.1kg
DPS Modulating System Data  
DPS means Digital Positioning System
Purpose Creates modulating electric actuator from on-off version
Main components PCB with potentiometer feedback and digital control
Input signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Output signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Response to loss of control signal Fail closed, Fail Open, Fail Freeze
No connections.

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.