J3C-S 24-240V Smart Electric Actuator

Type J3CS Model S85-BSR-DPS Smart Red Box electric actuator with BSR failsafe and DPS modulating function conversion kits pre-installed by J+J Automation

Model J3C-S85-BSR-DPS Failsafe Modulating Smart Electric Valve Actuator With 24-240V Single Multi Voltage Max 90Nm Run 85Nm

Overview: Maximum 90Nm 24-240V Multi-voltage reversible IP67 modulating quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F07, F05 x 17mm female star mounting.

Function: Continuous external power, movement controlled by DPS (Digital Positioning System) input control signal, typically 4-20mA or 0-10V. Output signal provided. Configurable to open, close, or freeze on loss of control signal. Pre-set to fail open, or close on loss of external power failure. Supplied with BSR & DPS systems pre-installed and function tested.

Select Actuator Function:

Sizing Criteria:

Max break torque 90Nm.
Max run and reseat torque 85Nm.
Max ambient temp range -20 to +70C.

Options:

12V Conversion PCB kit

ENQUIRE ABOUT THIS PRODUCT
JJ Failsafe Modulating Electric Actuator Type J3CS Overview  
Model J3C85S-BSR-DPS
Function Proportional control
On loss of power Fails closed or Fails open according to DPS setting
Max Break and Run Torque Nm 90 - 85
Supply Voltage Range 24-240V AC or DC
Working time 29s
Power Light Yes
Actuator Status Light Yes, multi-colour LED
Fault Status Light Yes, Flashing multi-colour LED
Electrical Connection External Din plugs (Supplied)
Valve mounting ISO5211 F05 and F07
Drive Output 17mm female star
Ingress Protection IP67 Fully weatherproof
Anti-condensation Protection Thermostatic heater supplied
Ambient Temperature range -20C to +70C
Over Torque Protection Electronic torque limiter
Emergency Hand Operation Yes, selectable manual override
Visual Position Indicator Yes, dome style, mechanically driven
End of Travel Confirmation Yes, 2 volt free SPDT micro-switches
Warranty 10,000 cycles or 1 year from date of purchase
Weight 3.0kg
DPS Modulating System Data  
DPS means Digital Positioning System
Purpose Creates modulating electric actuator from on-off version
Main components PCB with magnetic position sensing and digital control
Input signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Output signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Response to loss of control signal Fail closed, Fail Open, Fail Freeze
Accuracy To be confirmed
Component weight 0.1Kg including replacement cover change (3 Din plugs)
BSR Failsafe System Data  
BSR means Battery'Spring Return' (no mechanical springs)
Purpose Creates failsafe electric actuator from on-off version
Retrofittable Yes (simple to install)
Main components Industrial rechargeable NiCad battery and PCB
Initial minimum charge period 28h
Max operations from fully charged battery 5 at maximum torque
Recharge time after each movement Minimum 20 minutes
Battery consumption when working 6.2W
Nominal battery capacity 1000mA
Confuguration options Fail closed or fail open on loss of power (follows DPS setting)
On power resumption Respects control input signal at moment power restored
Battery charge 36mA/h
Component weight 0.23Kg
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.