J3C-S 24-240V Smart Electric Actuator

BSR+ DPS Battery back Up and Positioner Kit Converts An On Off J3C-S Actuator To A Failsafe Modulating Electric Actuator

BSR+DPS Plug and Play Positioner and Battery Back Up Kits for J3C-S Electric Actuator

Overview: User friendly plug and play function conversion kits to provide failsafe modulating function. Uses both the BSR failsafe and DPS modulating kits. Can be retro-fitted.

Function: Continuous external power, movement controlled by DPS (Digital Positioning System) input control signal, typically 4-20mA or 0-10V. Configurable to open, close, or freeze on loss of control signal. Pre-set to fail open, or close on loss of external power failure. Output signal provided.

Select Actuator Function:

Sizing Criteria:

Suits J3C-S Models 20, 35, 55 & 85

Options:

No options available

ENQUIRE ABOUT THIS PRODUCT
BSR & DPS Failsafe Modulating Kit Overview  
Insatlled kits BSR failsafe system and DPS modulating system
BSR Failsafe System Kit Overview  
BSR means Battery'Spring Return' (no mechanical springs)
Purpose Creates failsafe electric actuator from on-off version
Retrofittable Yes (simple to install)
Main components Industrial rechargeable NiCad battery and PCB
Initial minimum charge period 28h
Max operations from fully charged battery 5 at maximum torque
Recharge time after each movement Minimum 8 minutes
Battery consumption when working 6.2W
Nominal battery capacity 1000mA
Confuguration options Fail closed or fail open on loss of power
On power resumption Respects control input signal at moment power restored
Battery charge 36mA/h
Component weight 0.23Kg
DPS Modulating System Kit Overview  
DPS means Digital Positioning System
Purpose Creates modulating electric actuator from on-off version
Retrofittable Yes (simple to install)
Main components PCB with magnetic position sensing and digital control
Input signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Output signal options 0-20mA, 4-20mA, 0-10V, 2-10V
Response to loss of control signal Fail closed, Fail Open, Fail Freeze
Accuracy To be confirmed
Component weight 0.1Kg including replacement cover change (3 Din plugs)
   
J3CS - Removing the actuator's cover
J3CS - Installing the BSR failsafe system
J3CS - Installing the DPS positioning system
J3CS - Functional demonstration of DPS positioner

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.