J3-H 110-240V Smart Electric Valve Actuator

Type J3C Model H20 Electric 110V-240V Actuator with Battery Back Up Installed

J3-H20-BSR Failsafe Electric Actuator Maximum 25Nm for 110V-240V

Overview: Maximum 25Nm 85-240V Multi-voltage reversible IP65 failsafe quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F03,F04 & F05 x 14mm female star mounting.

Function: Power open, power close. Fails to pre-set position (open, or close) on external power failure. Designed to have power on at all times. Supplied with BSR (Battery 'Spring Return') failsafe system pre-installed and function tested.

Select Actuator Function:

Sizing Criteria:

Max break torque 25Nm.
Max run and reseat torque 20Nm.
Max ambient temp range -20 to +70C.

Options:

DPS Modulating function conversion kit to create failsafe modulating function.
9mm or 11mm female star drive output.

ENQUIRE ABOUT THIS PRODUCT
JJ Failsafe Electric Actuator Type J3-H20 Overview  
Model J3H20-BSR Failsafe
Function On Off
On loss of power Fails to pre-set position (closed or open)
Function conversion kit BSR pre-installed and tested by J+J
Kit type Industrial rechargeable battery and charging system
Max Break and Run Torque Nm 25 - 20
Supply Voltage Range 85-240V AC or DC
Working time 10s
Power Light Yes
Actuator Status Light Yes, red LED
Fault Status Light Yes, Flashing red LED
Electrical Connection External Din plugs (Supplied)
Valve mounting ISO5211 F03 F04 and F05
Drive Output 14mm female star
Ingress Protection IP67 Fully weatherproof
Anti-condensation Protection Thermostatic heater supplied
Ambient Temperature range -20C to +70C
Over Torque Protection Electronic torque limiter
Emergency Hand Operation Yes, selectable manual override
Visual Position Indicator Yes, dome style, mechanically driven
End of Travel Confirmation Yes, 2 volt free SPDT micro-switches
Warranty 10,000 cycles or 1 year from date of purchase
Weight 2.03kg
BSR Failsafe System Data  
BSR means Battery'Spring Return' (no mechanical springs)
Purpose Creates failsafe electric actuator from on-off version
Main components Industrial rechargeable NiCad battery and PCB
Initial minimum charge period 28h
Max operations from fully charged battery 5 at maximum torque
Recharge time after each movement Minimum 8 minutes
Battery consumption when working 6.2W
Nominal battery capacity 1000mA
Confuguration options Fail closed or fail open on loss of power
On power resumption Respects control input signal at moment power restored
Battery charge 36mA/h
   

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.