
Type J3C Model H85 Electric 110V-240V Actuator with Positioner Installed
J3C-H85-DPS Modulating Electric Actuator Maximum 90Nm for 110V-240V
Overview: Maximum 90Nm 85-240V Multi-voltage reversible IP65 modulating quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F07, F05 x 17mm female star mounting.
Function: Continuous external power, movement controlled by DPS (Digital Positioning System) input control signal, typically 4-20mA or 0-10V. Configurable to open, close, or freeze on loss of control signal. Pre-set to fail open, or close on loss of external power failure. Output signal provided. Supplied with DPS system pre-installed and function tested.
Select Actuator Function:
Sizing Criteria: Max break torque 90Nm.
Max run and reseat torque 85Nm.
Max ambient temp range -20 to +70C.
Options: BSR Failsafe function conversion kit to create failsafe modulating function.
ENQUIRE ABOUT THIS PRODUCTJJ Modulating Electric Actuator Type J3-H85 Overview | |
Model | J3H85-DPS Modulating |
Function | Proportional control |
On loss of power | Fails to pre-set position (closed or open) or freezes |
Function conversion kit | DPS pre-installed and tested by J+J |
Kit type | Digital positioner with magnetic position sensing |
Max Break and Run Torque Nm | 90 - 85 |
Supply Voltage Range | 85-240V AC or DC |
Working time | 30s |
Power Light | Yes |
Actuator Status Light | Yes, red LED |
Fault Status Light | Yes, Flashing red LED |
Electrical Connection | External Din plugs (Supplied) |
Valve mounting | ISO5211 F05and F07 |
Drive Output | 17mm female star |
Ingress Protection | IP67 Fully weatherproof |
Anti-condensation Protection | Thermostatic heater supplied |
Ambient Temperature range | -20C to +70C |
Over Torque Protection | Electronic torque limiter |
Emergency Hand Operation | Yes, selectable manual override |
Visual Position Indicator | Yes, dome style, mechanically driven |
End of Travel Confirmation | Yes, 2 volt free SPDT micro-switches |
Warranty | 10,000 cycles or 1 year from date of purchase |
Weight | 3.1kg |
DPS Modulating System Data | |
DPS means | Digital Positioning System |
Purpose | Creates modulating electric actuator from on-off version |
Main components | PCB with potentiometer feedback and digital control |
Input signal options | 0-20mA, 4-20mA, 0-10V, 2-10V |
Output signal options | 0-20mA, 4-20mA, 0-10V, 2-10V |
Response to loss of control signal | Fail closed, Fail Open, Fail Freeze |