Air Actuated Cast Iron Ball Valve with SS ball and CH-air A Type SR actuator
PA4802SB Full bore air operated 2 way ball valve with cast iron body flanged PN16, SS ball and A Type air actuator
Overview: SR Spring return air actuated ball valve full bore flanged PN16 cast iron ball valve, 2 piece, 2 way, supplied fully assembled and dry bench function tested. Actuator direct mounted to stainless ball valve for applications with a maximum working temperature of +80C.
Function: Single acting or spring return pneumatic actuator. Air to open, spring close. Fails closed on loss of air pressure.
Select Actuator Function:
Sizing Criteria: Pneumatic actuators have been sized on a maximum pressure wet service
Options: Stainless steel ball and stem.
Position control with a Namur pilot solenoid.
Position confirmation limit switch box.
Modulating control with positioner.
Max +130C service using a mounting kit.
Part No PA4802SB | |
CH-air A Type ATEX Approved Pneumatic Actuator Overview | |
Type | Rack and pinion |
Body Material | Hard anodised aluminium |
End Caps | Die cast aluminium |
Pistons | Die cast aluminium |
Pinion | Nickel plated steel |
Spring Type | Pre-compressed cartridge type |
Spring material | Epoxy coated spring steel |
Seals | NBR Nitrile Rubber |
Sliding Parts | Acetal resin |
Grease | High performance synthetic |
Fasteners | AISI 304 Stainless Steel |
Standards | Namur, ISO5211 & DIN3337, VDI-VDE-3845 |
Approvals | CE 2006/42/CE, ATEX EXII 2 GD 2014/34/UE, SIL-3 to IEC61508 & 61511 |
Exclusions | Excluded from PED 2014/68/UE Clause 1.2.j.ii |
Manufacturer | EU Manufacturer |
Direct Mount Cast Iron 2 Way Ball Valve Overview | |
Body Material | Cast Iron |
Ball Material | Stainless Steel |
Bore | Full bore |
Seat Material | PTFE |
Seal Material | NBR & Viton O Rings |
End Connections | Flanged PN16 |
Max Working Pressure | 16 Bar cold non-shock |
Working temperature range | -10C to +100C |
Manufacturer | China |