Air Actuated Stainless Steel Ball Valve

Air Actuated Stainless Ball Valve PN16 with CH-air C Type SR actuator

PC4102 Full bore PN16 flanged direct mount air operated ball valve with C Type pneumatic actuator.

Overview: SR Spring return air actuated ball valve full bore flanged PN16 stainless steel ball valve, 2 piece, 2 way, supplied fully assembled and dry bench function tested. Actuator direct mounted to stainless ball valve for applications with a maximum working temperature of +80C.

Function: Single acting or spring return pneumatic actuator. Air to open, spring close. Fails closed on loss of air pressure.

Select Actuator Function:

Sizing Criteria:
Pneumatic actuators have been sized on a maximum pressure wet service

Options:
Position control with a Namur pilot solenoid.
Position confirmation limit switch box.
Modulating control with positioner.
Max +130C service using a mounting kit.

ENQUIRE ABOUT THIS PRODUCT
No Datasheets.
Part No PC4102
CH-air C Type ATEX Approved Pneumatic Actuator Overview
TypeRack and pinion
Body MaterialHard anodised aluminium
End CapsDie cast aluminium
PistonsDie cast aluminium
PinionNickel plated steel
Spring TypePre-compressed cartridge type
Spring materialEpoxy coated spring steel
SealsNBR Nitrile Rubber
Sliding PartsNylon 46
FastenersAISI 304 Stainless Steel
Conforms toNamur, ISO5211 & DIN3337, VDI-VDE-3845
ApprovalsCE , ATEX EXII 2 GD
ManufacturerChina
Flanged PN16 2 Way Ball Valve Overview
Body MaterialStainless steel CF8M
Ball Material316SS
BoreFull bore
Seat MaterialRTFE
Seal MaterialPTFE
End ConnectionsFlanged PN16
Max Working Pressure16 Bar
Working temperature range-20C to +200C
ManufacturerChina
Part No PC2812
CH-air A Type ATEX Approved Pneumatic Actuator Overview
TypeRack and pinion
Body MaterialHard anodised aluminium
End CapsDie cast aluminium
PistonsDie cast aluminium
PinionNickel plated steel
Spring TypePre-compressed cartridge type
Spring materialEpoxy coated spring steel
SealsNBR Nitrile Rubber
Sliding PartsAcetal resin
GreaseHigh performance synthetic
FastenersAISI 304 Stainless Steel
StandardsNamur, ISO5211 & DIN3337, VDI-VDE-3845
ApprovalsCE 2006/42/CE, ATEX EXII 2 GD 2014/34/UE, SIL-3 to IEC61508 & 61511
ExclusionsExcluded from PED 2014/68/UE Clause 1.2.j.ii
ManufacturerEU Manufacturer
6000psi Rated 2 Way Ball Valve Overview
Body Material316SS S11
Ball Material316SS S11
BoreReduced bore
Seat MaterialPTFE/PVDF
Seal MaterialPTFE/ RTFE
End ConnectionsBSP PCrallel
Max Working Pressure400 Bar cold non-shock at max 20C
Working temperature range-20C to +150C
ManufacturerColson in the UK
No connections.

Get in touch

Should you wish to contact us by email, please complete the boxes below and click ‘SUBMIT’.