Electrically Actuated Brass Ball Valves

Modulating Electrically Actuated Brass Ball Valve WRAS Approved

E1105 Modulating Electric Ball Valve Full Bore Brass WRAS Approved and J3C-S Actuator with DPS pre-installed

Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with NPT female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Can be configured to stay put, fail open, or fail closed on loss of control signal.
Stays put on loss of external power.
Max +95C service using a mounting kit.

Part NumberE1105S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Brass Ball Valve Overview
Bore SizeFull bore giving unrestricted flow
End ConnectionsNPT Female
Body MaterialNickel plated brass
Ball MaterialHard chromed brass
Seat MaterialPTFE
Seal MaterialNBR
Pressure Rating40 Bar
Temperature Rating-20C to +95C
J3CS DPS Modulating System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".