Electric Cast Iron Ball Valve

Failsafe Modulating Actuated 3 Way Ball Valve Cast Iron Flanged PN16

E4916 Failsafe Modulating Electric Cast Iron 3 Way Ball Valve PN16 and J3C-S Actuator with BSR+DPS pre-installed

Overview: Electrically actuated failsafe modulating full bore cast iron ball valve, 3 way, ends flanged PN16,

Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.

Select Actuator Function:

Sizing Criteria:
J3CS Electrical on-off actuators have been sized on a maximum pressure wet service

Available L port or T port.
Can be configured to stay put, fail open, or fail closed on loss of control signal.
Can be configured to fail open, or fail closed on loss of external power.
Max +130C service using a mounting kit.

Part NumberE4916S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Cast Iron 3 Way Ball Valve Overview
Bore SizeFull bore
End ConnectionsPN16
Body MaterialCast Iron
Ball MaterialBrass with stainless steel option
Seat MaterialRPTFE
Seal MaterialPTFE
Pressure Rating16 Bar
Temperature Rating-20C to +130C
J3CS DPS Modulating System Demonstration
J3CS BSR Failsafe System Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".