Electrically Actuated Plastic Ball Valves

Failsafe Electrically Actuated ABS 3 Way Ball Valve Type TKD from FIP

E3414F Failsafe Electric 3 Way Ball Valve FIP TKD in ABS with J3C-S Smart Electric Actuator

Overview: EU manufactured FIP TKD 3 way triple union full bore ABS ball valve, 3 way L port or T port, blow-out proof ball and stem, EPDM seals with FKM (Viton) option, ends imperial or metric solvent sockets, or BSP, fitted with J3CS electric actuator via a J+J manufactured Easy-Fit mounting kit, assembled and tested at J+J's ISO:9001-2015 approved works in Matlock, Derbyshire.

Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +20C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Solvent sockets can be imperial or metric sizes, or BSP.
Flanged PN16 option.
Seals can be FPM (Viton).

Part NumberE3414FS
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
ABS 3 Way Ball Valve Overview
Bore SizeFull bore
End ConnectionsSolvent sockets
Body MaterialABS
Ball MaterialABS
Seat MaterialPTFE
Seal MaterialEPDM
Pressure Rating16 Bar at +20C max
Temperature Rating-40C to +70C
J3CS BSR Failsafe System Demonstration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".