Electrically Actuated Plastic Ball Valves

On Off Electrically Actuated ABS Ball Valve Type GF546 from Georg Fischer

E3113G On Off Electric Ball Valve GF546 in ABS with J3C-S Smart Electric Actuator

Overview: EU manufactured GF546 double union full bore ABS ball valve, 2 way, blow-out proof ball and stem, EPDM seals with FKM (Viton) option, ends imperial or metric solvent sockets, or BSP, fitted with J3CS electric actuator via a J+J manufactured Easy-Fit mounting kit, assembled and tested at J+J's ISO:9001-2015 approved works in Matlock, Derbyshire.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +20C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Solvent sockets can be imperial or metric sizes, or BSP.
Flanged PN16 option.
Seals can be FPM (Viton).

No Datasheets.
Part NumberE3113GS
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
ABS Ball Valve Overview
Bore SizeFull bore
End ConnectionsSolvent sockets
Body MaterialABS
Ball MaterialABS
Seat MaterialPTFE
Seal MaterialEPDM
Pressure Rating16 Bar at +20C max
Temperature Rating-40C to +70C
J3CS On-Off Operation Functional demostration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".