Failsafe Electrically Actuated Stainless Steel Ball Valve 6000psi 2 Way
E2814 Failsafe Electric Ball Valve 6000psi in Stainless Steel with J3C-S Smart Electric Actuator
Overview: The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with NPT female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
Select Actuator Function:
Options: BSPT, NPT or compression ends.
Can be configured fail open, or fail closed.
|JJ Electric Actuator Type J3CS Overview|
|Supply Voltage Range||24-240V AC or DC|
|Actuator Status Light||Yes, multi-colour LED|
|Fault Status Light||Yes, Flashing multi-colour LED|
|Electrical Connection||External Din plugs (Supplied)|
|Ingress Protection||IP67 Fully weatherproof|
|Anti-condensation Protection||Thermostatic heater supplied|
|Ambient Temperature range||-20C to +70C|
|Over Torque Protection||Electronic torque limiter|
|Emergency Hand Operation||Yes, selectable manual overrride|
|Visual Position Indicator||Yes, dome style, mechanically driven|
|End of Travel Confirmation||Yes, 2 volt free SPDT micro-switches|
|Stainless Ball Valve Overview|
|Bore Size||Reduced bore with full bore option|
|End Connections||NPT Female|
|Body Material||Forged 316SS S11 to NACE|
|Ball Material||Forged 316SS S11 to NACE|
|Seal Material||PTFE and VITON|
|Pressure Rating||414 Bar at max +150C|
|Temperature Rating||-20C to +150C|