Electric Stainless Steel Ball Valve Actuators

On Off Electrically Actuated Stainless Steel 3 Way Ball Valve 6000psi

E2913 On Off Electrical 3 Way Ball Valve 6000psi in Stainless Steel with J3C-S Smart Electric Actuator

Overview: The UK manufactured reduced bore stainless steel high pressure ball valve with NPT female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.

Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.

Select Actuator Function:

Sizing Criteria:

J3CS Electrical on off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

Available L port or T port.
Available as a bottom entry valve.
BSPT, NPT or compression ends.

Part NumberE2913S
JJ Electric Actuator Type J3CS Overview
Supply Voltage Range24-240V AC or DC
Power Light Yes
Actuator Status LightYes, multi-colour LED
Fault Status LightYes, Flashing multi-colour LED
Electrical ConnectionExternal Din plugs (Supplied)
Ingress ProtectionIP67 Fully weatherproof
Anti-condensation ProtectionThermostatic heater supplied
Ambient Temperature range-20C to +70C
Over Torque ProtectionElectronic torque limiter
Emergency Hand OperationYes, selectable manual overrride
Visual Position IndicatorYes, dome style, mechanically driven
End of Travel ConfirmationYes, 2 volt free SPDT micro-switches
Stainless 3 Way Ball Valve Overview
Bore SizeReduced bore with full bore option
End ConnectionsNPT Female
Body MaterialForged 316SS S11 to NACE
Ball MaterialForged 316SS S11 to NACE
Seat MaterialPVDF
Seal MaterialPTFE and VITON
Pressure Rating414 Bar at max +150C
Temperature Rating-20C to +150C
J3CS On-Off Operation Functional demostration
J3CS LED Status Light Demonstration
J3CS Manual Override Demonstration
J3CS Electronic Torque Limiter Demonstration
J3CS Actuator Automatic Factory Test Procedure

Get in touch

Should you wish to contact us by email, please complete the boxes below and click "SUBMIT".