
Type J3C Model L85 Electric 24V Actuator with Battery Back Up Installed
J3C-L85-BSR Failsafe Electric Actuator Maximum 90Nm for 24V
Overview: Maximum 90Nm 12-24V Multi-voltage reversible IP67 failsafe quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F07, F05 x 17mm female star mounting.
Function: Power open, power close. Fails to pre-set position (open, or close) on external power failure. Designed to have power on at all times. Supplied with BSR (Battery 'Spring Return') failsafe system pre-installed and function tested.
Select Actuator Function:
Sizing Criteria:
Max break torque 90Nm.
Max run and reseat torque 85Nm.
Max ambient temp range -20 to +70C.
Options:
DPS Modulating function conversion kit to create failsafe modulating function.
ENQUIRE ABOUT THIS PRODUCTJJ Failsafe Electric Actuator Type J3C-L85 Overview | |
Model | J3CL85-BSR Failsafe |
Function | On Off |
On loss of power | Fails to pre-set position (closed or open) |
Function conversion kit | BSR pre-installed and tested by J+J |
Kit type | Industrial rechargeable battery and charging system |
Max Break and Run Torque Nm | 90 - 85 |
Supply Voltage Range | 12-24V AC or DC |
Working time | 30s |
Power Light | Yes |
Actuator Status Light | Yes, red LED |
Fault Status Light | Yes, Flashing red LED |
Electrical Connection | External Din plugs (Supplied) |
Valve mounting | ISO5211 F05 and F07 |
Drive Output | 17mm female star |
Ingress Protection | IP67 Fully weatherproof |
Anti-condensation Protection | Thermostatic heater supplied |
Ambient Temperature range | -20C to +70C |
Over Torque Protection | Electronic torque limiter |
Emergency Hand Operation | Yes, selectable manual override |
Visual Position Indicator | Yes, dome style, mechanically driven |
End of Travel Confirmation | Yes, 2 volt free SPDT micro-switches |
Warranty | 10,000 cycles or 1 year from date of purchase |
Weight | 3.3kg |
BSR Failsafe System Data | |
BSR means | Battery'Spring Return' (no mechanical springs) |
Purpose | Creates failsafe electric actuator from on-off version |
Main components | Industrial rechargeable NiCad battery and PCB |
Initial minimum charge period | 28h |
Max operations from fully charged battery | 5 at maximum torque |
Recharge time after each movement | Minimum 20 minutes |
Battery consumption when working | 6.2W |
Nominal battery capacity | 1000mA |
Confuguration options | Fail closed or fail open on loss of power |
On power resumption | Respects control input signal at moment power restored |
Battery charge | 36mA/h |