Air Actuated Stainless Steel Ball Valve
Air Actuated Stainless 3 way Ball Valve with CH-air A Type DA actuator
PA2301 Reduced bore stainless steel air operated 3 way ball valve with A Type pneumatic actuator.
Overview: DA Double acting CH-air A Type air actuated ball valve full bore stainless steel 3 way ball valve, ends BSP,
Function: Double acting pneumatic actuator. Air to open, air to close. Sized with a minimum air pressure at the actuator of 5.5 bar (80psi). Stays put on loss of air pressure.
Select Actuator Function:
A Type Pneumatic Actuated Stainless 3 Way Ball Valve On Off
A Type Pneumatic Actuated Stainless 3 Way Ball Valve Failsafe
Sizing Criteria: Pneumatic actuators have been sized on a maximum pressure wet service
Options: L port or T port flow.
Position control with a Namur pilot solenoid.
Position confirmation limit switch box.
Modulating control with positioner.
Max +130C service using a mounting kit.
Part No PA2301 | |
CH-air A Type ATEX Approved Pneumatic Actuator Overview | |
Type | Rack and pinion |
Body Material | Hard anodised aluminum |
End Caps | Die cast aluminum |
Pistons | Die cast aluminum |
Pinion | Nickel plated steel |
Spring Type | Pre-compressed cartridge type |
Spring material | Epoxy coated spring steel |
Seals | NBR Nitrile Rubber |
Sliding Parts | Acetal resin |
Grease | High performance synthetic |
Fasteners | AISI 304 Stainless Steel |
Standards | Namur, ISO5211 & DIN3337, VDI-VDE-3845 |
Approvals | CE 2006/42/CE, ATEX EXII 2 GD 2014/34/UE, SIL-3 to IEC61508 & 61511 |
Exclusions | Excluded from PED 2014/68/UE Clause 1.2.j.ii |
Manufacturer | EU Manufacturer |
Screwed 3 Way Ball Valve Overview | |
Body Material | 316SS CF8M |
Ball Material | 316SS CF8M |
Bore | Reduced bore |
Seat Material | RPTFE |
Seal Material | PTFE |
End Connections | Screwed BSP |
Max Working Pressure | 62 bar cold non-shock |
Working temperature range | -20C to +200C |
Manufacturer | China |
No connections.